The key steps to produce a perfect cardboard bale
1. The first step to making a perfect cardboard bale is obviously to collect enough cardboards for the baling machines to bale.
2. And then you need to make sure the bottom of the cardboard balers is a completely flat surface. You can put a sheet of cardboard to create a flat bottom.
3. Make sure the feeding doors are open and then manually put all this scrap cardboards in it until the chamber is full. Last but not least, remember to close the doors after the feeding process.
4. The feeding process will repeat a couple of times until the chamber can’t put cardboards no more.
5. After the baling process finished, you need to manually tie these bales with PP straps or other straps you have. And you can tie the bales both horizontally and vertically to make sure the density of the bale and make sure it will not get loose during the transportation and storage.
6. The final step is to eject a bale, normally the baler machines will be equipped with the strap and chain eject system. So, you can easily eject a bale safely and quickly with these eject system.
SKBALER always the right choice
SKBALER is dedicated to the recycling business, and we will try our best to offer you the best services with our gorgeous balers. For making a perfect cardboards baler, we recommend the V8060T20. The V8060T20 can produce 1 to 2 bales only in one hour and each bale’s weight is around 50 kg to 110 kg. The V8060T20 will be perfect for the limited or low-power spaces. But if you have big demands in baling the cardboards then the HAT110125T150 will suit you the best, it can produce 6 to 8 bales in an hour, and each bale’s size is 1100*1250*500mm. If you want to know more about our cardboard balers, directly call or email us. We will be happy to have you contacted.